UHT - MIDI INTERFACES

UHT - MIDI interfaces convert UHT keyboard signals into MIDI signals. 4 different MIDI Encoders are provided.

MIDIO 4

MIDIO 4 is the name of an encoder that converts UHT-keyboard signals into MIDI signals. Up to four UHT-keyboards can be connected (4 manual organ). Each manual is connected to the MIDIO 4 by a flat ribbon cable. If there are less than four manuals, the other connectors simply remain free.

Commercially available MIDI cables must be used for the MIDI connections. They are not included in the scope of delivery.

Technical features of the MIDIO 4 encoder:

• up to 4 manuals and/or pedal board
• MIDI OUT
• MIDI IN
• USB
• dynamic (velocity) ON/OFF
• at "dynamic OFF" you can choose between upper and lower contact
• individual adjustment of the MIDI channels for each manual

MIDIO 4 LC

MIDIO 4 LC is the small version of the MIDIO 4.

Technical features of the MIDIO 4 LC encoder:

• up to 4 manuals and/or pedal board
• MIDI OUT
• dynamic (velocity) ON/OFF
• at "dynamic OFF" you can choose between upper and lower contact
• MIDI channels are fixed = channel 1, 2, 3 and 4

MIDIO 1

Only one UHT-KEYBOARD / PEDALBOARD or UHT-CONTACT SYSTEM can be connected. It has 1 x MIDI IN and 1 x MIDI OUT port but no USB port. With Jumpers to be set the velocity mode can be switched ON or OFF When the velocity mode is switched OFF you can chose between the upper or lower contact (same as with MIDIO4).

Technical features of the MIDIO 1 encoder:

• 1 manual or pedal board
• MIDI OUT
• MIDI IN
• dynamic (velocity) ON/OFF
• at "dynamic OFF" you can choose between upper and lower contact
• individual adjustment of the MIDI channels

MIDIO 1 LC

MIDIO 1 LC is the small version of the MIDIO 1.

Technical features of the MIDIO 1 LC encoder:

• 1 manual or pedal board
• MIDI OUT
• dynamic (velocity) ON/OFF
• at "dynamic OFF" you can choose between upper and lower contact
• MIDI channel is fixed = channel 1